Insulated sectional steel door with 1-3/4" thick polyurethane core and 25-gauge exterior steel for durability and improved thermal performance.

Ideal for any applications that require an insulated door.

Available in sizes up to 36' wide x 24' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

Fire-rated rolling counter shutter providing code-compliant fire protection at service openings. Provided with fusible links that automatically release to close the door at 165°F, the shutter can also be triggered by smoke and heat detectors, a building’s alarm system, or LM21 fail-safe release devices. All FireCurtain counter shutters comply with UL, C-UL, FM, and CSFM requirements for 3-hour, 1-1/2-hour, or ¾-hour fire ratings.

Any counter windows that require a fire rated counter shutter.

Available in sizes up to 12' wide and 8' high.

Standard warranty is one year.

Rolling security grille, straight or brick pattern, provides visibility, airflow, and controlled access for commercial applications. Exterior and interior applications.

Openings where security but also visibility and air circulations are important.

Available in sizes up to 35' wide and 24' high.

Standard warranty is one year.

Compact rolling counter shutter designed to secure concession and service openings.

Counter window openings.

Available in sizes up to 20' wide x 10' high.

Standard warrant is one year.

High-performance rolling steel door engineered for high-cycle durability and security.

Optimized for high-traffic environments where standard rolling steel doors lack the necessary speed and cycle life.

Available in sizes up to 20' wide x 14' high.

Standard warranty is two years or 300,000 cycles (whichever comes first).

Rolling service door. Aluminum, steel, or stainless steel slats available in multiple gauges for durable performance in commercial and industrial environments. Available with flat, insulated flat, small contour, large contour, or perforated slat profiles to accommodate functional and aesthetic requirements.

DuraCoil rolling services doors can be used in both exterior and interior applications including corrosive environments. They are also suitable for high usage applications where durability is important.

DuraCoil rolling service doors can be manufactured in sizes up to 40' wide.

Standard warranty is one year.

Custom aluminum standing-seam or interlocking panel awnings with welded frames provide durable, low-maintenance sun and rain protection at building transitions.

Specified for commercial and institutional entrances, walkways, and transitions where rigid canopy systems are required to resist wind, snow, and long-term exposure.

Not intended for applications exceeding engineered load capacities or where architectural integration requires non-standard attachment conditions without structural coordination.

Standard manufacturer warranties apply; extended warranties may be available depending on coating and finish selection.

Post-supported extruded aluminum canopy systems engineered for wind and snow loads provide economical weather protection along pedestrian walkways and entrances.

Primary entries, transit shelters, covered walkways.

Requires ground support posts.

Tensioned exterior shading and weather protection using high-performance architectural fabrics. Systems are configured for attachment to building structures and coordinated with façade assemblies and adjacent construction.

Used at building entrances, storefronts, windows, walkways, and outdoor gathering areas for sun control, rain protection, and visual identity in commercial and institutional projects.

Not intended for locations requiring impact resistance, fire resistance, or continuous snow load capacity beyond fabric system design limits.

Fabric warranties vary by selected fabric manufacturer; extended warranties greater than one year may be available depending on fabric type.

Extruded aluminum sunshade systems with horizontal or vertical louvers designed to reduce solar heat gain and glare while enhancing facade appearance.

Window walls, façades, curtain walls.

Not intended as primary weather barrier.

Warranty terms are project-specific; extended warranties may be available depending on materials and finishes.

Wall-mounted aluminum canopy providing unobstructed overhead cover. Internally supported extruded aluminum canopy with steel support arms and integrated drainage provides streamlined weather protection without ground supports.

Main entries, storefront canopies.

Requires structurally capable wall substrate.

Overhead supported extruded aluminum canopy with built-in drainage and customizable fascia and decking provides durable weather protection at building entrances and service areas.

Building entrances, walkways, exterior transitions.

Not suitable where structural support is inadequate.

Steel palisade security fencing system with anti-climb picket profiles and mechanically fastened components designed for high-security perimeter applications. Vertical pickets attach to pre-punched horizontal rails using break-away nuts and anti-pry bolts, with replaceable individual pickets, anti-climb projections, and I-beam support posts for permanent installation.

Commercial and Industrial

See Warranty Information

StuccoDri is a water repellent, high performance, permeability reducing liquid admixture (PRA) designed for cementitious stucco. It is a liquid admixture that replaces water in the mixing process at a 1:1 ratio. Integral, permanent water resistance—built into the mix. Up to 120% permeability reduction on full-thickness stucco. Compatible with lath-applied and direct-applied stucco systems. Accepts traditional, properly applied exterior paints and coatings designed for stucco.

Exterior above-grade wall surfaces in commercial and residential construction, including stucco assemblies. Suitable for use in both new construction and remodeling projects.

Not intended to function as a waterproofing membrane or as a surface-applied treatment. Do not apply in standing water or to saturated substrates; use only where substrates are properly prepared and suitable for the intended installation conditions.

Corning® Med-X® LT Glass, Lemi-Thin radiation shielding/x-ray barrier. Meets Cat II Impact Ratings. Maximum finished size of up to 40" x 60". Registered as compliant with U.S. Food and Drug Administration (FDA) regulations. and McGrory Glass, Inc. is the only FDA Registered Medical Device Manufacturer; Repackager/Relabeler of FDA Registered radiation shielding glass. FDA Registered Material has a verified, traceable process linking the manufacturer to the processor to the installer to the project within the formalized format of FDA Registration. Traceability helps ensure compliance with medical device standards: at any point, from receipt to post-installation, each individual piece of Corning® Med-X® LT Glass can be traced back through its shipment, processing, and manufacture.

Corning® Med-X® Glass, lead, radiation shielding glass, dimensions up to 54" x 108". Optical Properties - Refractive Index nd: 1.76 Transmission % @ 550nm through 5mm path: ≥85.0 Mechanical Properties - Lead (Pb): 52% Barium (Ba): 17% Mechanical Properties - Density (g/cm3): 4.8 Knoop Hardness (kg/mm2): 409 Young’s Modulus (GPa): 62.6 Torsion Modulus (GPa): 24.8 Poisson’s Ratio: 0.26 Coefficient of Thermal Expansion (x10 -7 /°C): 78.8

ElectraView™, zero energy required for OBSCURE or CLEAR state. Energy Data: Input Power - 120VAC /60Hz Output Power - 48VAC /60Hz Energy Consumption - 0.3 watts/ ft2 power on | 0 Watts/ ft2 power off Power Quality - Film is protected by an isolation transformer, reducing spikes, harmonics, and noise when using ElectraView™ PDLC controller by McGrory. Operating Temperature - 0°-35°C INTERIOR ONLY

Doors and entrances, Office fronts, Hospital room dividers & Curtain walls, Emergency room / ICU sliding & breakaway doors, X-Ray privacy, Conference rooms, Laminated glass

Factory-formed cold-formed steel jamb and header system for framed openings, intended to replace built-up stud-and-track assemblies with a single-piece component. Manufactured from galvanized steel complying with ASTM A653 and designed in accordance with AISI S100, providing code-compliant structural support for door and window openings under the International Building Code (IBC).

Galvanized steel plate veneer anchor with vertical projecting leg protruding through continuous insulation to receive veneer triangle. Available in hot dip galvanized finish.

Masonry veneer anchor screw attached to stud framed, concrete, or masonry exterior walls. Use with or without seismic clips and continuous rods.

Install anchor before continuous wall insulation. Maximum 4.5 inch wide cavity with maximum 4.5 inch thick continuous insulation. Maximum 9 inch veneer triangle length.

Galvanized steel screw and washer anchor with projecting eye to receive hot dip galvanized steel wire tie. Available in polymer coated finish.

Masonry veneer anchor screw attached to metal and wood stud framed exterior walls with continuous insulation. Use with or without seismic clips and continuous rods.

Install anchor after continuous wall insulation. Maximum 6 inch sheathing plus insulation thickness. Maximum 7 inch veneer wire tie length.

Ladder style with projecting eyes, galvanized steel, horizontal joint reinforcing for masonry cavity wall joints. Available in standard, heavy duty, and extra heavy duty side and cross wire diameters with mill or hot dip galvanized finish.

Cavity walls with masonry veneer and concrete masonry backup at exterior walls. Use with loadbearing and non-loadbearing, ungrouted and vertically reinforced and grouted concrete masonry. Use with veneer hooks with or without seismic clips and continuous rods.

Maximum 12 inch concrete masonry wythe. Maximum 6 inch wide cavity with maximum 4 inch thick continuous insulation. Maximum 7 inch veneer hook length.

Galvanized steel triangle wire veneer tie fitted with dovetail head for insertion into dovetail slot. Available in hot dip galvanized finish.

Masonry veneer anchor for concrete and masonry substrates with or without continuous insulation. Use with or without seismic clips and continuous rods.

Requires dovetail slot cast into concrete substrate or surface mounted on concrete or masonry substrate. Maximum 5 inch dovetail triangle length.

Rebar Positioners are used to properly locate the rebar in the cores of the CMU.

Ladder style, galvanized steel, horizontal joint reinforcing for unit masonry joints. Available in standard, heavy duty, and extra heavy duty side and cross wire diameters with mill or hot dip galvanized finish.

Single wythe concrete masonry exterior walls and interior partitions. Use with loadbearing and non-loadbearing, ungrouted and vertically reinforced and grouted concrete masonry.

Maximum 12 inch concrete masonry wythe.

Type 304 stainless steel, self-adhered, laminated, flexible flashing with bonded butyl adhesive and release liner in 12 to 36 inch widths. Accessories include stainless steel termination bars, drip edges, prefabricated inside and outside corners, prefabricated end dams, and sealants.

Self-adhered masonry through wall flashing used with concrete, concrete masonry, and sheathing structural backup. Primer is not required.

Requires termination bar to secure top edge. Requires support across masonry cavity air space.

Life of wall warranty. 3GEN Masonry Products, Inc. (“3GEN”) warrants that its GENFLASH Membrane (“Product”) will be free from material defects that cause water penetration through the membrane for ten (10) years from the date of sale, subject to the terms, conditions, and limitations stated herein. This warranty applies solely to GENFLASH installed as an in-cavity wall flashing product to channel water out of weep holes, in accordance with 3GEN’s installation instructions. Other installation methods are explicitly excluded from this warranty.