AGC Pyrobel® by McGrory Glass is a barrier-to-heat product that protects against radiant and conductive heat transfer. Fire-rating of up to 45, 60, 90 or 120 minutes. Clear, low-iron glazing. Cradle to Cradle Certified™ Silver • Environmental Product Declaration (EPD) available. Red List free

For use in doors, sidelites, transoms, borrowed lites, and wall applications. Interior and exterior use.

SCHOTT PYRAN® L Platinum Fire-Rated Glass is a fire-protection-rated and impact-safety-rated glazing material with a thickness of approximately 5/16″ (9 mm), transparent and wireless, made from a laminated glass-ceramic with a transparent appearance for use in safety-rated locations such as door lites, sidelites, and windows. Fire-rating up to 90 minutes and up to 180 minutes in doors. Passes positive pressure test standard UL 10C / NFPA 252. Withstands thermal shock. Approved for use with any standard fire-rated frame with same rating. Can be used to construct insulated glazing units. Can be lightly sandblasted or delivered with surface-applied opacity film, without affecting fire rating. ‍

PYRAN® Platinum Fire-Protective Glass is a fire-protection-rated glass-ceramic glazing material with a thickness of approximately 3/16″ (5 mm)with a transparent appearance For use in non-impact, non-safety rated locations such as transoms and windows. Largest sheet size available in the industry at 51″ x 99″. Transparent and wireless.

Corning® Med-X® Glass, lead, radiation shielding glass, dimensions up to 54" x 108". Optical Properties - Refractive Index nd: 1.76 Transmission % @ 550nm through 5mm path: ≥85.0 Mechanical Properties - Lead (Pb): 52% Barium (Ba): 17% Mechanical Properties - Density (g/cm3): 4.8 Knoop Hardness (kg/mm2): 409 Young’s Modulus (GPa): 62.6 Torsion Modulus (GPa): 24.8 Poisson’s Ratio: 0.26 Coefficient of Thermal Expansion (x10 -7 /°C): 78.8

Corning® Med-X® LT Glass, Lemi-Thin radiation shielding/x-ray barrier. Meets Cat II Impact Ratings. Maximum finished size of up to 40" x 60". Registered as compliant with U.S. Food and Drug Administration (FDA) regulations. and McGrory Glass, Inc. is the only FDA Registered Medical Device Manufacturer; Repackager/Relabeler of FDA Registered radiation shielding glass. FDA Registered Material has a verified, traceable process linking the manufacturer to the processor to the installer to the project within the formalized format of FDA Registration. Traceability helps ensure compliance with medical device standards: at any point, from receipt to post-installation, each individual piece of Corning® Med-X® LT Glass can be traced back through its shipment, processing, and manufacture.

ElectraView™, zero energy required for OBSCURE or CLEAR state. Energy Data: Input Power - 120VAC /60Hz Output Power - 48VAC /60Hz Energy Consumption - 0.3 watts/ ft2 power on | 0 Watts/ ft2 power off Power Quality - Film is protected by an isolation transformer, reducing spikes, harmonics, and noise when using ElectraView™ PDLC controller by McGrory. Operating Temperature - 0°-35°C INTERIOR ONLY

Doors and entrances, Office fronts, Hospital room dividers & Curtain walls, Emergency room / ICU sliding & breakaway doors, X-Ray privacy, Conference rooms, Laminated glass