Gypsum-based roof board with coated fiberglass mat facers and mold-resistant core, used as a substrate board, thermal barrier, or coverboard in commercial roofing assemblies. Coated facer is designed to improve adhesion in fully adhered membrane systems and may eliminate the need for field-applied primer in select assemblies.

Use in low-slope roofing systems including fully adhered, mechanically attached, and ballasted assemblies with single-ply, modified bitumen, fluid-applied, built-up roofing, spray foam, and metal roofs. Functions as a coverboard, thermal barrier, and substrate for vapor retarders and roofing membranes. Also suitable for sheathing at roof-side parapet and penthouse walls.

Not intended for prolonged exposure to weather or use as a finished surface. Verify compatibility with membrane type and adhesive requirements; primer elimination is system-dependent. Install as part of a tested and approved roof assembly to achieve required fire-resistance ratings.

Gypsum-based roof board with coated fiberglass mat facers and mold-resistant core, used as a substrate board, thermal barrier, or coverboard in commercial roofing assemblies. Compatible with mechanically attached roofing systems and provides a stable, continuous surface for membrane application.

Use in low-slope roofing assemblies as a coverboard or substrate for single-ply membranes, vapor retarders, and metal roofing systems. Also used as a thermal barrier and in UL-classified roof assemblies.

Not intended for exterior wall applications or prolonged exposure to weather. Install as part of a tested roofing assembly; verify compatibility with membrane and attachment method. Not a finished surface.

Reinforced gypsum roof board with coated fiberglass mat facers and moisture-resistant core, used as a substrate board, thermal barrier, or coverboard in commercial roofing assemblies. Approved for use in assemblies meeting FM Very Severe Hail (VSH) classification. Coated facer supports adhesive-applied membrane systems.

Use in low-slope roofing systems including fully adhered single-ply, modified bitumen, fluid-applied, spray foam, and metal roofing assemblies. Functions as a coverboard, thermal barrier, and substrate for vapor retarders and roofing membranes. May be used at roof-side parapet and penthouse walls.

Not intended for prolonged exposure to weather or use as a finished surface. Verify compatibility with membrane and adhesive system; primer requirements are system-dependent. Install as part of a tested assembly to achieve required fire and hail classifications.

Glass mat gypsum shaftliner panel with a moisture- and mold-resistant Type X core, used in non-load-bearing fire-resistance-rated shaftwall and area separation wall assemblies.

Use in cavity shaftwall systems for elevator shafts, stairwells, and mechanical chases with 1- to 4-hour fire-resistance ratings. Use in area separation wall systems for multifamily construction with 2-hour ratings. Suitable for assemblies exposed to weather during construction.

Not intended for structural applications or as a finished surface. Use only in tested shaftwall and area separation wall assemblies to achieve required fire-resistance ratings.

Paper-faced gypsum shaftliner panel with a moisture- and mold-resistant Type X core, used in non-load-bearing fire-resistance-rated shaftwall and area separation wall assemblies.

Use in cavity shaftwall systems for elevator shafts, stairwells, and mechanical chases with 1- to 4-hour fire-resistance ratings. Use in area separation wall systems for multifamily construction. Compatible with I-Stud, C-T Stud, C-H Stud shaftwall systems and H-Stud area separation wall systems.

Not intended for structural applications or as a finished surface. Use only in tested assemblies to achieve required fire-resistance ratings. Not for exterior use or prolonged exposure to moisture.

Glass mat gypsum sheathing with a moisture- and mold-resistant core and coated fiberglass facers, used as an exterior substrate for wall and soffit framing in wood and steel construction.

Use as exterior sheathing behind cladding systems including wood, vinyl, fiber cement siding, masonry veneer, EIFS, and stucco. Suitable for wall and soffit applications, including radius conditions. May be used in fire-rated assemblies when specified.

Not intended for use as a finished surface. Do not exceed published exposure limits. Verify compatibility with air/water-resistive barriers and cladding systems.

Abrasion-resistant gypsum board with a moisture- and mold-resistant Type X core and reinforced paper facers, used in interior wall and ceiling assemblies subject to surface wear.

Use in interior walls and ceilings in high-traffic areas such as corridors, lobbies, entryways, and service spaces. Suitable where abrasion resistance, moisture resistance, and Type X gypsum board are required. May be used as a tile backer in dry or limited moisture areas.

Not intended for exterior use or continuous high-moisture environments. Not for areas requiring impact-resistant assemblies unless specified. Use in tested assemblies to achieve fire-resistance ratings. Not a finished surface.

Gypsum plaster base panel with tapered edges, absorptive face paper, and Type X fire-resistant core, used as a substrate for veneer plaster systems in wall and ceiling assemblies.

Use as a base for veneer plaster systems including Kal-Kote®, Uni-Kal®, X-KALibur®, and Gypsolite® in interior walls and ceilings. Suitable for wood or steel framing, furring, and masonry substrates. Used in fire-rated assemblies where specified.

Not intended for exterior use or as a finished surface. Must be finished with an appropriate plaster system. Use only in tested assemblies to achieve fire-resistance ratings. Not for continuous high-moisture environments.

Cementitious backer board composed of Portland cement, aggregate, and fiberglass mesh, used as a substrate for tile and finishes in interior and exterior applications.

Use as an underlayment for tile in tub and shower surrounds, countertops, and flooring. Suitable for interior and exterior wall and ceiling applications, and as a substrate for direct-applied exterior coating systems. May be used in fire-rated assemblies where specified.

Not intended for structural applications. Not a finished surface. Verify compatibility with waterproofing, tile systems, and coatings. Follow manufacturer requirements for joint treatment and fastening.

Sound-damping gypsum board with a moisture- and mold-resistant core, used in interior wall and ceiling assemblies to reduce sound transmission.

Use in interior partitions and ceiling assemblies requiring acoustic separation, including dwelling units, bedrooms, offices, and similar spaces. Applicable in wall and floor/ceiling assemblies designed for STC and IIC performance.

Not intended for exterior use or continuous high-moisture exposure. Acoustic performance is assembly-dependent; use in tested assemblies to achieve required ratings. Not a finished surface.