ClarkDietrich | Specifying Resources by Conspectus Cloud

sales support:

Technical support:

Website:

additional info:

about

ClarkDietrich offers a comprehensive lineup of products and services for both cold-formed steel framing and drywall/plastering finishing systems. We manufacture innovative products for interior and exterior framing, interior and exterior finishing, floor and roof framing, as well as clips, connectors, metal lath, welded wire, barrier mesh and accessories. As the demands for higher performance in all aspects of today’s buildings rise, we partner with teams of architects, engineers, building developers and owners, contractors, and more on projects of all sizes, scope, and complexity. Far beyond products, our collaborations increasingly involve efforts and expertise that support smarter installation and design, including resources for BIM and ClarkDietrich Engineering Services LLC. Formed in 2011 through the combination of two established market leaders—ClarkWestern Building Systems and Dietrich Metal Framing—ClarkDietrich is in an unprecedented position to help you bring change to the built environment.

Address

9050 Centre Pointe Drive, Suite 400 West Chester, OH 45069

-

| - | MaxTrak® Slotted Deflection Track | ClarkDietrich

Division

The MaxTrak System allows the top of the wall stud to float within the track legs. This connection allows for vertical live load movement of the primary structure without transferring axial loads to the wall studs.

applications

Limitations

warranty

09

-

2116

092116 | 09-2116 | BlazeFrame® (DSL 2) Deep Leg | ClarkDietrich

Division 09

Provides joint protection for up to 1" with UL 2079 Class II or III Movement Capabilities. Legs with slots spaced 1" o.c. for positive attachment of studs per listed assemblies in UL Fire Resistance Directory. A 2mm thickness of cured intumescent material adhered to metal profiles provides air and smoke seals. When exposed to heat above 375 degrees Fahrenheit, the intumescent material expands up to 35 times its size. This provides protection from heat and flame passage during a fire event.

applications

Composite Firestop/Framing for use in fire-resistant joint systems in or between fire-resistance-rated walls and floor/ceiling or roof/ceiling assemblies.

Limitations

warranty

09

-

2216

092216 | 09-2216 | RC Deluxe® Resilient Channel (RCSD) | ClarkDietrich

Division 09

RC Deluxe is one of the most effective, low-cost methods of improving sound transmission loss through wood and steel frame partitions. RC Deluxe is the preferred resilient channel because of its extra-wide 1-1/2” flange for the installation of the gypsum board.

applications

Limitations

warranty

09

-

2216

092216 | 09-2216 | RedHeader Lite Rough Opening System | ClarkDietrich

Division 09

RedHeader Lite is designed to replace conventional built-up jambs and headers while providing better results in half the time. One-piece jambs eliminate the additional studs, track and screws required to frame conventional rough openings.

applications

Limitations

warranty

5

-

4000

54000 | 5-4000 | Drift Rail and Clip | ClarkDietrich

Division 5

ClarkDietrich Drift Rail (DR) or Drift Headed Rail (DHR) with Drift Rail Clip (DRC), is a uniquely designed two-piece system that is used to attach curtain-wall studs to the building structure and allows for vertical and lateral movement or to be rigidly attached. The system utilizes a C-Shaped Drift Rail and distinctively designed Drift Rail Clips that rotate into position for easy installation. The multifaceted Drift Rail Clips use Proprietary Deflection Screws for attachment to the wall studs and allows for 3" vertical deflection (1-1/2" up and down) and is also designed with 1/8" holes to rigidly attach wall studs.

applications

Limitations

warranty

5

-

4000

54000 | 5-4000 | EASYCLIP™ D & T-SERIES™ | ClarkDietrich

Division 5

The EasyClip™ D-Series™ & T-Series™ Anchor Clips are high-performance, cost effective solutions for knee wall-to-foundation connections, light duty shear wall-to-foundation connections and truss to wall connections.

applications

Base Connection

Limitations

warranty

5

-

4000

54000 | 5-4000 | Extended Uni-Clip™ (UXRC) | ClarkDietrich

Division 5

ClarkDietrich’s Extended Uni-Clip™ rigid framing clip is used to attach exterior wall studs to the structure of the building. This clip is ideal for all medium and large standoff conditions.

applications

Bypass Connection

Limitations

warranty

5

-

4000

54000 | 5-4000 | FastClip™ Slide Clip (FCSC) | ClarkDietrich

Division 5

ClarkDietrich FastClip™ Slide Clip deflection clips are used to attach exterior curtain-wall studs to the building structure and provide for vertical building movement independent of the cold-formed steel framing.

applications

Bypass Connection

Limitations

warranty

5

-

4000

54000 | 5-4000 | Spazzer® 5400 | ClarkDietrich

Division 5

ClarkDietrich TradeReady® Spazzer® 5400 spacer bar is a pre-notched, 16-gauge or 18-gauge, galvanized steel spacer and bridging bar, engineered to facilitate the rapid, efficient erection of exterior curtain wall framing, loadbearing walls and high interior partitions constructed of structural studs.

applications

Limitations

warranty

5

-

4000

54000 | 5-4000 | Uni-Clip End Clip (UCEC) | ClarkDietrich

Division 5

The Uni-Clip™ framing clip has stiffened corners that provide superior design values and are installed easily with screws or powder-actuated fasteners. This clip is ideal for most rigid connections, including shear, tension and two-axis loading.

applications

ClarkDietrich’s Uni-Clip™ framing clip is a universal framing clip used to attach and support numerous rigid framing conditions.

Limitations

warranty

7

-

0543

70543 | 7-0543 | ProChannel Ci™ Cladding Support System | ClarkDietrich

Division 7

ProChannel Ci™ Cladding Support System is a thermally and structurally efficient exterior wall cladding support system utilizing the self-sealing Grip-Deck TubeSeal® fastening system from TruFast Walls.

applications

ProChannel Ci Cladding Support with Grip-Deck TubeSeal® Technology is to be installed as rainscreen framing over exterior continuous insulations, providing a minimal thermal footprint while providing a stable support system for exterior wall cladding construction on a ventilated rainscreen system.

Limitations

warranty

9

-

2116

92116 | 9-2116 | BlazeFrame® (DL 2) Deep Leg | ClarkDietrich

Division 9

Provides joint protection for up to 1" with UL 2079 Class II or III Movement Capabilities. Two solid legs supporting "free floating" studs per listed assemblies in UL Fire Resistance Directory. A 2mm thickness of cured intumescent material adhered to metal profiles provides air and smoke seals. When exposed to heat above 375 degrees Fahrenheit, the intumescent material expands up to 35 times its size. This provides protection from heat and flame passage during a fire event.

applications

Profile with two solid legs with firestop on both sides. Composite Firestop Deflection Track System for use in fire-rated wall assemblies. Two solid legs supporting “free floating” studs.

Limitations

warranty

9

-

2116

92116 | 9-2116 | BlazeFrame® RipTrak | ClarkDietrich

Division 9

The BlazeFrame RipTRAK is the only UL tested fire-rated head of wall joint system that offers an alternate listing by eliminating castle cuts and sealant. Meets UL 2079, 5th edition; HW-D-1125 and HW-D-0823.

applications

BlazeFrame RipTRAK is a deflection track with an offset shoulder that represents the thickness of the gypsum board (5/8" or 1-1/4”). A second piece of gypsum board (wall cladding strips) is fit flush to the underside of the slab (w/sealant) or to a fluted deck (without castle cuts & sealant), and is then fastened to the shoulder. This allows the roof/floor assembly and the BlazeFrame RipTRAK to move in relation to the wall assembly. This also allows the wall cladding strips (the rip board) that is attached to the BlazeFrame RipTRAK to slide over the primary wall assembly.

Limitations

warranty

9

-

2116

92116 | 9-2116 | ClarkDietrich SOUND CLIP™ (CDSC) | ClarkDietrich

Division 9

The ClarkDietrich Sound Clip™ (CDSC) is used in conjunction with 18mil (25ga) 7/8" deep drywall furring channel. It is used to fasten gypsum wallboard in various wall and floor to ceiling applications, while simultaneously providing acoustical separation. This significantly reduces the amount of airborne sound filtering from room to room. The ClarkDietrich Sound Clip increases the STC ratings in most assemblies while reducing sound transfer.

applications

Limitations

warranty

9

-

2116

92116 | 9-2116 | Danback® Flexible Wood Backing System | ClarkDietrich

Division 9

Danback provides superior connection shear and pullout strength to support and meet even some of the heaviest loading conditions. Simply snap, flex and screw Danback into place. The patented hinge design actually flexes around the stud and snaps into place for a perfect fit-every time.

applications

Danback® Flexible Wood Backing System, featuring D-Blaze® or FlamePRO® fire-retardant treated wood (FRT), has made wood backing installation easy and economical-eliminating cutting, notching, ripping and routing.

Limitations

warranty

9

-

2116

92116 | 9-2116 | MaxTrak® Slotted Deflection Track | ClarkDietrich

Division 9

The MaxTrak System allows the top of the wall stud to float within the track legs. This connection allows for vertical live load movement of the primary structure without transferring axial loads to the wall studs.

applications

Limitations

warranty

9

-

2116

92116 | 9-2116 | Spazzer® 9200 | ClarkDietrich

Division 9

The Spazzer 9200 Spacing Bar is a prenotched bridging and spacing bar that facilitates the rapid erection of interior, nonload-bearing, nonstructural studs into a rigid, accurately laid out gridwork that has excellent resistance to stud rotation and displacement. Spazzer 9200 bar is a 33mils (20ga) bar that is 50" long and prenotched to hold studs rigidly on 16" or 24" centers. The slots have been pre-engineered to hold studs in place by utilizing “shear” to bridge studs into a rigid gridwork.

applications

Limitations

warranty

9

-

2216

92216 | 9-2216 | 360TRAK™ | ClarkDietrich

Division 9

360TRAK™ is a flexible framing product that is a high-performance solution for creating intricate curves, bends, and variable radii for dramatic and distinctive walls and bulkheads in non-load bearing partitions and ceilings.

applications

Limitations

warranty

9

-

2216

92216 | 9-2216 | Barrier Mesh | ClarkDietrich

Division 9

Barrier Mesh™ is a tough, rigid, heavy-gauge steel mesh installed typically onto stud framing (both metal and wood), with gypsum sheathing applied to its surface to conceal the barrier mesh, thereby providing a significant barrier to security breach across that wall system. ClarkDietrich Barrier Mesh (BM) can also be used without sheathing to provide an enhanced protection of security to walls, ceilings as well as floors. Barrier Mesh is produced in different size diamonds and gauges for minimum, medium or maximum security protection.

applications

Limitations

warranty

9

-

2216

92216 | 9-2216 | BlazeFrame® (DL 2) Deep Leg | ClarkDietrich

Division 9

Provides joint protection for up to 1" with UL 2079 Class II or III Movement Capabilities. Two solid legs supporting "free floating" studs per listed assemblies in UL Fire Resistance Directory. A 2mm thickness of cured intumescent material adhered to metal profiles provides air and smoke seals. When exposed to heat above 375 degrees Fahrenheit, the intumescent material expands up to 35 times its size. This provides protection from heat and flame passage during a fire event.

applications

Profile with two solid legs with firestop on both sides. Composite Firestop Deflection Track System for use in fire-rated wall assemblies. Two solid legs supporting “free floating” studs.

Limitations

warranty

9

-

2216

92216 | 9-2216 | BlazeFrame® (DSL 2) Deep Leg | ClarkDietrich

Division 9

Provides joint protection for up to 1" with UL 2079 Class II or III Movement Capabilities. Legs with slots spaced 1" o.c. for positive attachment of studs per listed assemblies in UL Fire Resistance Directory. A 2mm thickness of cured intumescent material adhered to metal profiles provides air and smoke seals. When exposed to heat above 375 degrees Fahrenheit, the intumescent material expands up to 35 times its size. This provides protection from heat and flame passage during a fire event.

applications

Composite Firestop/Framing for use in fire-resistant joint systems in or between fire-resistance-rated walls and floor/ceiling or roof/ceiling assemblies.

Limitations

warranty

9

-

2216

92216 | 9-2216 | BlazeFrame® RipTrak | ClarkDietrich

Division 9

The BlazeFrame RipTRAK is the only UL tested fire-rated head of wall joint system that offers an alternate listing by eliminating castle cuts and sealant. Meets UL 2079, 5th edition; HW-D-1125 and HW-D-0823. For alternate details, please refer to configuration A, items 3A1 and 3B1. This is good for both roof and wall assemblies. BlazeFrame RipTRAK is a deflection track with an offset shoulder that represents the thickness of the gypsum board (5/8" or 1-1/4”). A second piece of gypsum board (wall cladding strips) is fit flush to the underside of the slab (w/sealant) or to a fluted deck (without castle cuts & sealant), and is then fastened to the shoulder. This allows the roof/floor assembly and the BlazeFrame RipTRAK to move in relation to the wall assembly. This also allows the wall cladding strips (the rip board) that is attached to the BlazeFrame RipTRAK to slide over the primary wall assembly.

applications

Limitations

warranty

9

-

2216

92216 | 9-2216 | ClarkDietrich Shaftwall System | ClarkDietrich

Division 9

ClarkDietrich provides fully tested and approved assemblies for shaftwall construction. What makes the ClarkDietrich system unique is that it has been tested with almost every gypsum board and shaft liner manufacturer in the country. Unlike competing systems, the ClarkDietrich C-T Stud and J-Track system provide maximum flexibility to choose from a variety of board manufacturers. Other systems are only tested with one type of gypsum board and shaftliner. This unprecedented flexibility means quick availability of product at economical costs. It provides you with a choice and peace of mind knowing you’re using a tested and approved assembly.

applications

Stairwall Systems are designed to enclose stairwalls, this system is finished on both sides with a single layer of 1/2" fire code board. Shaftwall systems are interior nonload-bearing fire rated wall assemblies that provide critical, life safety, fire-resistant protection for elevator shafts, stairwells, vertical chases and mechanical enclosures. Shaftwalls in elevators and stairwells are one of the most important wall assemblies in a building. They provide the only means of evacuation from the building in an emergency. Vertical chases and mechanical enclosures keep vital communication, power, water, fresh air and exhaust systems intact when a fire occurs.

Limitations

warranty

9

-

2216

92216 | 9-2216 | Pony Wall | ClarkDietrich

Division 9

The ClarkDietrich Pony Wall is intended to support out-of-plane loading of cantilevered partial wall systems that are unsupported at the top track.

applications

Limitations

warranty

9

-

2216

92216 | 9-2216 | ProSTUD® Drywall Framing System | ClarkDietrich

Division 9

ProSTUD Drywall Framing System (ProSTUD® and ProTRAK®) with Smart Edge™ Technology is the innovative steel drywall stud that sets a new industry benchmark for high performance. Its patented design combines high-strength steel with additional stiffening enhancements for a drywall framing stud previously unimagined. ProSTUD Drywall Framing is backed by comprehensive laboratory testing for strength, fire and sound. No other drywall framing system has been as thoroughly tested as ProSTUD. So not only is it a dream to work with, but it also has the performance to meet the requirements of today’s building codes. ProSTUD is available nationwide.

applications

Limitations

warranty

9

-

2216

92216 | 9-2216 | TRAKLOC® Drywall Framing System | ClarkDietrich

Division 9

TRAKLOC allows you to order one length member and “adjust” the length accordingly to make up for variances in the slab. The TRAKLOC Stud and TRAKLOC Track systems consists of a traditional-style framing member combined with an interlocking adjustable component. The adjustable portion allows for telescopic length adjustments and can accommodate variances in the slab, minor wall heights per floor, etc. The interlocking component of the stud and track eliminate the need for most connections.

applications

Limitations

Not all TRAKLOC products are available in all markets. Please check with your local ClarkDietrich sales representative for availability in your area.

warranty

9

-

2400

92400 | 9-2400 | Diamond Mesh Lath | ClarkDietrich

Division 9

A superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone reinforcement. Applications include ceilings, soffits, and fascia surfaces, and under ceramic tile in wall, ceiling, and floor applications. Metal lath is useful in general purpose applications and is the best lath available for ornamental work and for flat or contoured surfaces as well as for use as a reinforcing underlay for spray-applied fireproofing.

applications

Stone Veneer, Stucco

Limitations

warranty

9

-

2400

92400 | 9-2400 | E-Screen (Drainage Mat) | ClarkDietrich

Division 9

Moisture penetration is a prevalent issue in these wall systems and creates a range of problems from cracking to complete failure of the wall. Without a rainscreen, moisture can intrude past the outer surface of the wall and become trapped in the system, creating issues with rusting and mold growth that can structurally compromise the system. By using ClarkDietrich E-Screen, the water inside the wall is drained away more efficiently and the increased ventilation properties allows the system to dry out more effectively.

applications

ClarkDietrich E-Screen can be used in stucco, stone veneer, brick, or under various siding installations to provide an effective method for drainage and ventilation in the wall system.

Limitations

warranty

9

-

2400

92400 | 9-2400 | Mega Lath | ClarkDietrich

Division 9

Mega Lath is an engineered product that provides easy attachment for both wood and steel construction. Specifically designed for stucco applications that require extra reinforcing, Mega Lath can be used as an alternative to 3.4 lb/yd2 diamond mesh metal lath specified in ASTM C847 and at 1.95 lb/yd2, Mega Lath can be installed 24" o.c. over open framing. Mega Lath is recommended wherever 2.5 lb/yd2 or 3.4 lb/yd2 metal sheet lath is specified.

applications

Mega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.

Limitations

warranty

10 Year Limited Warranty. More information can be found here: https://www.clarkdietrich.com/sites/default/files/media/documents/StructaWire_10-Year-Limited-Warranty.pdf

9

-

2400

92400 | 9-2400 | StructaLath III | ClarkDietrich

Division 9

Structalath III is designed to promote uniform plaster thickness and provide superior reinforcement and crack resistance. The longitudinal wires are cold rolled (flattened) to eliminate curvature memory. The hat channel furr provides superior stucco embedment and each and every cross wire is securely furred. The product is designed for ease of handling and the six secondary cold rolled longitudinal wires simplify attachment. Structalath III is designed to be worker friendly and improve construction site efficiency.

applications

Limitations

warranty

10 Year Limited Warranty. More information can be found here: https://www.clarkdietrich.com/sites/default/files/media/documents/StructaWire_10-Year-Limited-Warranty.pdf

9

-

2400

92400 | 9-2400 | Structalath Twin Trac | ClarkDietrich

Division 9

Designed especially for commercial construction, Twin Trac has all the enhanced features of regular Structalath with the addition of eight secondary cold-rolled longitudinal wires that add strength to form a ‘track’ for convenient attachment. Twin Trac can be substituted wherever 2.5 metal lath has been specified. Structalath Twin Trac 2.5/316 is a reduced furr version that is used with 1/2″ stucco systems.

applications

Stone Veneer, Stucco

Limitations

warranty

10 Year Limited Warranty. More information can be found here: https://www.clarkdietrich.com/sites/default/files/media/documents/StructaWire_10-Year-Limited-Warranty.pdf

9

-

2400

92400 | 9-2400 | V-Truss Corner | ClarkDietrich

Division 9

Structa V-TRUSS Bullnose or Straight Corner is welded wire lath corner for 3 coat stucco applications. V-TRUSS Corner is engineered to provide superior reinforcement. The unique truss design ensures a consistent "true" - straight corner with fewer sharp ends for ease of handling. The abundant nailing opportunities and twin wires create an ease of attachment and the increased rigidity promote precise corner plaster work.

applications

Stone Veneer, Stucco

Limitations

warranty

10 Year Limited Warranty. More information can be found here: https://www.clarkdietrich.com/sites/default/files/media/documents/StructaWire_10-Year-Limited-Warranty.pdf

9

-

2400

92400 | 9-2400 | V-Truss for Walls & Ceilings | ClarkDietrich

Division 9

V Truss for Walls & Ceilings combines a series of 3/8-inch 'V' shaped trusses, and heavy perforated draft paper that is sandwiched between the primary sheet and back layer of stiffening wires. The sheets are lightweight, yet strong and easy to cut. Attachment points are identified on the printed kraft paper for ease of installation.

applications

V Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.

Limitations

warranty

10 Year Limited Warranty. More information here: https://www.clarkdietrich.com/sites/default/files/media/documents/StructaWire_10-Year-Limited-Warranty.pdf