120 minute, CPSC Cat. II, ASTM E119 tested, fire resistive tempered glazing that blocks radiant heat transfer. Butt-glazed assemblies and other decorative glass make-ups available.

Fire resistive wall assemblies. Available in butt-glazed applications.

5-Year warranty

120 minute, CPSC Cat. II, ASTM E119 tested, clear transparent wall glazing that blocks radiant heat transfer. Can be customized to include energy performance, noise abatement benefits, bullet resistance, hurricane resistance and unlimited decorative options.

Wall assemblies.

5-Year warranty

90 minute, CPSC Cat. II, ASTM E119 tested, clear transparent wall glazing that blocks radiant heat transfer. Can be customized to include energy performance, noise abatement benefits, bullet resistance, hurricane resistance and unlimited decorative options.

Door and wall assemblies.

5-year warranty

Combined underslab physical termite barrier and vapor retarder manufactured from high-performance extruded polyolefin film with integrated termite-resistant materials. Provides continuous, non-toxic protection against subterranean termite intrusion while reducing moisture vapor transmission beneath concrete slabs and crawl space assemblies.

Used below concrete slabs and in crawl space construction where both termite protection and moisture vapor control are required. Suitable for residential, commercial, and institutional projects following integrated pest management strategies.

Not intended for applications requiring chemical termite treatment in lieu of physical barriers or installations that do not follow manufacturer requirements for continuity, seam sealing, and detailing at penetrations and foundation interfaces. Performance depends on maintaining a continuous barrier system.

Pango Wrap - Limited Warranty

Multi-layer underslab soil gas retarder manufactured from high-grade prime virgin resins to reduce migration of soil gases into building slabs. Designed as a cost-effective, preemptive solution for sites with trace levels of volatile organic compounds (VOCs), providing durable performance and long-term stability.

Used below interior concrete slabs on grade in commercial, residential, and industrial construction where basic soil gas control is desired. Suitable for projects requiring preemptive mitigation of trace VOCs and general soil gas protection.

Not intended for sites requiring full soil gas barrier performance or high-level contaminant mitigation. Installation must follow manufacturer requirements for subgrade preparation, seam sealing, and integration with other gas mitigation components where applicable.

Drago Wrap Soil Gas - Limited Warranty

10-mil underslab vapor retarders manufactured from proprietary blends of prime virgin polyolefin resins and additives to reduce moisture vapor transmission through concrete slabs. Available in Class A and Class C performance levels to accommodate varying project requirements, both providing improved durability and resistance to deterioration compared to generic recycled polyethylene films. Class A membranes also support mitigation of soil gases such as radon and methane.
Class A exceeds ASTM E1745 Class A, B, and C requirements; Class C exceeds ASTM E1745 Class C requirements.
Made in USA

Used below interior concrete slabs on grade for moisture vapor control and protection of moisture-sensitive floor finishes. Suitable for commercial, residential, and institutional construction. Class A is used where enhanced puncture resistance and optional soil gas mitigation are desired, while Class C provides an economical option for projects with lighter construction demands.

Not intended for applications other than underslab vapor control or installations that do not follow manufacturer requirements for subgrade preparation, seam sealing, and protection during placement. Class C membranes are not recommended where higher puncture resistance or maximum vapor performance is required.

Stego Life of the Building Warranty

Multi-layer underslab soil gas barrier manufactured from high-grade prime virgin resins to reduce transmission of soil gases and moisture vapor. The extrusion film combines gas barrier technology with extremely low permeability to provide protection against volatile organic compounds (VOCs), methane, radon, sulfates, and other soil contaminants.
Made in USA

Used below interior concrete slabs on grade in commercial, residential, and industrial construction where control of soil gases and moisture vapor is required. Suitable for projects with environmental concerns, contaminated sites, or where enhanced gas mitigation is necessary.

Not intended for applications outside below-slab gas and vapor control systems or installations that do not follow manufacturer requirements for subgrade preparation, seam sealing, and penetration detailing. Membrane performance depends on integration with a complete soil gas mitigation system where required.

Drago Wrap Soil Gas - Limited Warranty

20-mil underslab vapor barrier manufactured from a proprietary blend of prime virgin resins and additives in a multi-layer extrusion film to provide enhanced resistance to moisture vapor and soil gas transmission. Increased thickness and durability make it suitable for demanding applications requiring maximum protection against moisture intrusion and construction-related damage.
Reference Standards: Exceeds ASTM E1745 Class A, B, and C requirements.
Made in USA

Used below interior concrete slabs on grade in commercial, residential, and industrial construction. Suitable for moisture-sensitive environments and critical facilities such as healthcare, laboratories, and data centers where enhanced vapor protection is required. Helps reduce risk of flooring failures and mitigates soil gases including radon and methane.

Not intended for applications other than underslab vapor control or installations that do not follow manufacturer requirements for subgrade preparation, seam sealing, and protection during concrete placement. Proper detailing at penetrations and terminations is required to maintain performance.

Stego Life of the Building Warranty

15-mil underslab vapor barrier manufactured from a proprietary blend of prime virgin resins and performance additives to reduce moisture vapor and soil gas transmission through concrete slabs. The membrane provides extremely low permeability, wide roll widths to minimize seams, and compliance with ASTM E1745 Class A, B, and C requirements.

Used below interior concrete slabs on grade to protect moisture-sensitive floor finishes and building assemblies. Suitable for commercial, residential, and institutional construction where control of vapor transmission and soil gases is required. Wide 14-foot rolls reduce field seams and support efficient installation.

Stego Life of the Building Warranty

Extruded thermoplastic roof rib component designed to replicate the appearance of traditional standing seam metal roofing when used with Flex PVC roofing membranes. The rib profile is hot air welded to the membrane surface, providing a durable, integrated aesthetic feature without compromising the watertight roofing system.

Used on PVC single-ply roofing systems where the appearance of standing seam metal roofing is desired. Ribs can be welded at custom spacing and layouts to achieve project-specific architectural designs. Available in a range of colors coordinated with Flex PVC membranes.

Not intended for roofing systems other than compatible PVC membrane assemblies or installations that do not follow manufacturer welding and layout requirements.

Up to 20 Year Warranty

Thermoplastic polyolefin (TPO) single-ply roofing membrane combining the weather resistance of ethylene-propylene rubber with the heat-weldable properties of polypropylene. Formulated without liquid or polymeric plasticizers to provide long-term weather resistance and membrane stability.

Low-slope roofing systems for new construction and reroofing where heat-welded seams and thermoplastic membrane performance are required.

Not intended for high-solvent or grease-laden exposure without confirmed compatibility; verify wind uplift assembly ratings, fire classification, and chemical resistance for project-specific conditions prior to specification.

45 Mil TPO - Up to 10 years; 60 Mil TPO- Up to 20 Years; 80 Mil TPO - Up to 30 Years

60-mil self-adhered thermoplastic polyolefin (TPO) roofing membrane with heat-weldable seams and factory-applied pressure-sensitive adhesive. Combines TPO weathering performance with a 100 percent solids hot-melt adhesive to reduce VOC and odor concerns while maintaining welded seam integrity.

Used in low-slope roofing assemblies where a self-adhered installation is preferred to reduce fasteners and simplify installation. Supplied in 5- and 10-foot widths (50- and 100-foot rolls) with an uncoated selvage edge for hot-air welded field seams and a dual-sided silicon-coated release liner for controlled installation.

Not intended for roofing assemblies requiring mechanical attachment in lieu of adhesive bonding. Membrane performance depends on proper substrate compatibility and installation in accordance with manufacturer requirements, including hot-air welding of seams.

Up to 20 Year Warranty

60-mil self-adhered fleece-backed thermoplastic polyolefin (TPO) roofing membrane with heat-weldable seams and factory-applied pressure-sensitive adhesive. Polyester-reinforced TPO sheet is formulated without liquid or polymeric plasticizers. Fleece backing improves substrate compatibility, accommodates minor surface irregularities, and increases cushioning, puncture resistance, and hail resistance. May reduce total installed cost in recover applications by minimizing tear-off and additional separation layers.
Sustainability / Performance Resistant to mildew, bacteria, and algae growth to help maintain high solar reflectivity and support reduced cooling loads and mitigation of urban heat island effects. Manufactured without plasticizers or chlorinated compounds.

Used in low-slope roofing systems for new construction and re-roofing applications. Used in fully adhered roofing systems and recover applications over approved existing roof assemblies, including smooth built-up roofing and other compatible substrates. Suitable for projects requiring increased puncture resistance, improved wind uplift performance, or installation over irregular surfaces.

Not intended for roofing assemblies outside thermoplastic single-ply systems or installations that do not comply with manufacturer requirements for substrate preparation, temperature conditions, and seam welding. Performance depends on proper substrate evaluation and installation in accordance with manufacturer guidelines.

45 Mil FB TPO - Up to 10 or 15 Years; 60 Mil FB TPO - Up to 25 Years; 80 Mil FB TPO - Up to 30 Years

Reinforced PVC decking membrane for high-traffic balcony and roof deck applications. Formulated for UV stability, chemical resistance, stain resistance, and slip resistance. Functions as both exposed walking surface and waterproofing layer for occupied exterior deck assemblies.

Balconies, terraces, roof decks, podium decks, and other pedestrian traffic surfaces requiring exposed waterproofing and slip-resistant performance.

Not intended for vehicular traffic; confirm structural deck slope and drainage provisions, and verify compatibility with underlying substrates and flashing components prior to specification.

10 Yr Material Only Warranty

Thermoplastic PVC single-ply roofing membrane reinforced with polyester scrim and formulated with UV inhibitors for long-term weather resistance. Heat-welded seams create permanent watertight bonds stronger than the membrane itself, providing durable performance in demanding environments and across wide temperature ranges. Applicable PVC membranes are 100% recyclable at end of service life.

Used in low-slope roofing systems requiring mechanically attached, adhered, or other thermoplastic membrane assemblies. Suitable for projects where resistance to weather exposure, contaminants, and temperature fluctuations is required.

Substrate must be concrete, approved insulation and cover boards, or approved existing roof assemblies compatible with PVC roofing membranes. Separation required over asphaltic, bituminous, or polystyrene substrates. Reflective surface may not be appropriate where heat gain is desired. Seams must be heat welded in accordance with manufacturer requirements to maintain watertight performance.

50 Mil MF/R - Up to 10 or 15 Years; 60 Mil MF/R - Up to 20 years; 80 Mil MF/R - Up to 30 years

60, 72, or 80-mil polyester-reinforced PVC thermoplastic membrane with factory-laminated fleece backing. Fleece layer accommodates minor substrate irregularities, provides separation, reducing the need for slip sheets in approved re-roofing applications.

Used in mechanically attached or fully adhered roofing systems, including re-roofing over approved existing roof assemblies. Adhered installations using water-based PVC substrate adhesive can achieve FM Class 1-270 over lightweight concrete where high wind uplift resistance is required.

Not intended for roofing assemblies outside mechanically attached or fully adhered PVC single-ply systems. Substrate must be dry and structurally sound; fleece backing accommodates minor surface irregularities but does not bridge significant defects. Verify compatibility with asphaltic or chemical exposures where applicable. Seams must be heat welded in accordance with manufacturer requirements.

50 Mil FB - Up to 10 or 15 years; 60 Mil FB - Up to 25 years; 80 Mil FB - Up to 30 years

Thermoplastic single-ply roofing membrane manufactured with DuPont™ Elvaloy® KEE (ketone ethylene ester) polymer. KEE polymer remains chemically bound within the membrane, minimizing plasticizer migration and maintaining flexibility and toughness over time, including in extreme climates.

Used in mechanically attached, fully adhered, ballasted, and vegetated (green roof) roofing systems. Reinforced membranes are available with smooth backing or fleece backing to accommodate various roof assembly types.

Compatible substrates and manufacturer-approved fastening or bonding adhesives required. Mechanically attached systems may not be suitable where deck penetration is restricted or where higher wind uplift performance is required without fully adhered installation. Fully adhered applications depend on proper adhesive selection and substrate preparation.

50 Mil MF/R - Up to 10 or 15 Years; 60 Mil MF/R - Up to 20 Years; 80 Mil MF/R - Up to 30 Years

Thermoplastic single-ply roofing membrane formulated with DuPont™ Elvaloy® KEE (ketone ethylene ester) polymer. KEE polymer remains chemically bound within the membrane to minimize plasticizer migration and maintain flexibility over time. Fleece backing improves adhesion to irregular substrates, provides cushioning, and increases puncture resistance in adhered roof assemblies.

Suitable for mechanically attached, fully adhered, ballasted, and vegetated (green roof) roofing assemblies. Reinforced membranes are available with smooth backing for standard installations or fleece backing for adhered systems and compatible substrates.

For fully adhered applications only; not intended for mechanically attached systems. Compatible substrates and manufacturer-approved asphalt or adhesive required; unsuitable where substrate conditions prevent proper adhesion.

50 Mil FB- Up to 10 or 15 years; 60 MIl FB- Up to 25 Years; 80 Mil FB - Up to 30 Years

Fire resistive, ballistic rated aluminum framing system available in multiple profiles. Offered in standard and custom finishes, including powder coat, clear anodized, bronze anodized, black anodized, Kynar® 500 coatings, Valspar®, Decoral®, wood veneer, ornamental metal, and many more.

Doors

5-Year warranty

Fire protective, aluminum framing system for doors, sidelites, transoms and openings. Offered in standard and custom finishes, including powder coat, clear anodized, bronze anodized, black anodized, Kynar® 500 coatings, Valspar®, Decoral®, wood veneer, ornamental metal, and many more.

Windows/Openings

5-Year warranty

Fire protective, aluminum framing system for doors, sidelites, transoms and openings. Offered in standard and custom finishes, including powder coat, clear anodized, bronze anodized, black anodized, Kynar® 500 coatings, Valspar®, Decoral®, wood veneer, ornamental metal, and many more.

Doors

5-Year warranty

Fire resistive, hurricane rated, aluminum framing system with Florida Product Approval numbers for Fixed Window/Wall (16382) and Single and Pair Doors (16888). Complies with High Velocity Hurricane Zone (HVHZ) testing requirements. Also available with TX Department of Insurance Approval and UL Certifications. Offered in standard and custom finishes, including powder coat, clear anodized, bronze anodized, black anodized, Kynar® 500 coatings, Valspar®, Decoral®, wood veneer, ornamental metal, and many more.

Doors

5-Year warranty

Full-vision, temperature-rise doors with a maximum door height of 10 feet. Offered in standard and custom finishes including high performance fluoropolymer finishes by PPG, aluminum clad, stainless steel clad and more.

Doors

5-year warranty

Fire protective framing for doors, sidelites, transoms and openings. Full-vision doors with a maximum door height of 10 feet. Offered in standard and custom finishes including high performance fluoropolymer finishes by PPG, aluminum clad, stainless steel clad and more.

Windows/Openings

5-year warranty

Fire protective framing for doors, sidelites, transoms and openings. Full-vision doors with a maximum door height of 10 feet. Offered in standard and custom finishes including high performance fluoropolymer finishes by PPG, aluminum clad, stainless steel clad and more.

Doors

5-year warranty

Fire resistive glass floor assembly up to 2 hours with the largest tested and listed individual glass panel sizes for fully-supported and butt-glazed floor applications

Floors

5-year warranty

Flexible, economical and creative solution for fire protective openings or fire resistive walls without visible metal framing.

Windows/Openings and Walls

5-year warranty

Fire resistive, ballistic rated aluminum framing system available in multiple profiles. Offered in standard and custom finishes, including powder coat, clear anodized, bronze anodized, black anodized, Kynar® 500 coatings, Valspar®, Decoral®, wood veneer, ornamental metal, and many more

Windows/Openings and Walls

5-year warranty

Fire resistive, blast rated aluminum framing system available in multiple profiles. Offered in standard and custom finishes, including powder coat, clear anodized, bronze anodized, black anodized, Kynar® 500 coatings, Valspar®, Decoral®, wood veneer, ornamental metal, and many more

Windows/Openings and Walls

Fire resistive, hurricane rated, aluminum framing system with Florida Product Approval numbers for Fixed Window/Wall (16382) and Single and Pair Doors (16888). Complies with High Velocity Hurricane Zone (HVHZ) testing requirements. Also available with TX Department of Insurance Approval and UL Certifications. Offered in standard and custom finishes, including powder coat, clear anodized, bronze anodized, black anodized, Kynar® 500 coatings, Valspar®, Decoral®, wood veneer, ornamental metal, and many more

Walls, Windows/Openings

5-year warranty

Fire resistive aluminum framing system available in multiple profiles for multi-story spans of glass. Fully vetted for exterior performance with static & dynamic water pressure testing, air infiltration testing, thermal cycling & condensation evaluation, and structural, seismic and interstory displacement testing.

Curtain Walls

5-year warranty

Fire resistive, aluminum framing system available in multiple profiles. Offered in standard and custom finishes, including powder coat, clear anodized, bronze anodized, black anodized, Kynar® 500 coatings, Valspar®, Decoral®, wood veneer, ornamental metal, and many more.

Walls

5-year warranty

45-120 minute, CPSC Cat. II, ASTM E119 tested, clear transparent wall glazing that blocks radiant heat transfer and meets forced entry requirements

Fire resistive doors, windows/openings and wall assemblies for prisons and other high security areas.

5-year warranty

60 minute, CPSC Cat. II, ASTM E119 tested, fire resistive tempered glazing that blocks radiant heat transfer. Butt-glazed assemblies and other decorative glass make-ups available.

Fire resistive wall assemblies. Available in butt-glazed applications.

5-year warranty

60 minute, CPSC Cat. II, ASTM E119 tested, clear transparent wall glazing that blocks radiant heat transfer. Can be customized to include energy performance, noise abatement benefits, bullet resistance, hurricane resistance and unlimited decorative options.

Fire resistive doors and wall assemblies

5-year warranty

45 minute, CPSC Cat II, ASTM E119 tested, clear transparent glazing that blocks radiant heat transfer. Can be customized to include energy performance, noise abatement benefits, bullet resistance, hurricane resistance and unlimited decorative options.

Fire protective doors, sidelites, transoms and windows/openings.

5-year warranty

20-45 minute, CPSC Cat II, bi-directional clear specialty tempered glazing with partial radiant heat protection

Fire protective doors, sidelites, transoms and windows/openings

5-year warranty

20-45 minute, CPSC Cat II, directional clear specialty tempered glazing with partial radiant heat protection.

Fire protective doors, sidelites, transoms and windows/openings.

Lifetime warranty

45 minute, low-iron, CPSC Cat. II, clear specialty fire protective glazing with partial radiant heat protection.

Fire protective doors, sidelites, transoms and windows/openings.

Lifetime Warranty

45 minute, CPSC Cat II, clear specialty fire protective glazing that meets the hose stream test.

Fire protective doors, sidelites, transoms and windows/openings.

Lifetime warranty

20 minute, CPSC Cat. II, clear specialty tempered glazing. Decorative options also available.

Fire protective doors and partitions.

Lifetime warranty.

45-90 minute clear, non-wired, and tint free glazing that meets all the fire and safety requirements for doors up to 100 square inches.

46/60/90 minute door vision lites limited to 100 square inches.

Lifetime Warranty

1-3/4" diameter washer for use with Grip-Deck® screws or nails. Dual prongs enable pre-spotting for on-the-wall screw assembly. The flexible perimeter flattens without tearing insulation face.

The Plasti-Grip ci Prong Washer is for use with fasteners to attach rigid insulation (EPS, XPS, ISO, etc.) over a primary air barrier. Attaches EPS foam for EIFS synthetic wall systems. Compatible with a nail gun, hammer, or screw gun.

This warranty is provided in lieu of all other expressed or implied warranties, including warranties of merchantability or fitness for a particular purpose. TRUFAST is not responsible for consequential or incidental damages.

Steel insulation attachment plate designed to mechanically secure mineral wool insulation to wood, steel, or concrete substrates. Grip-Lok® MW Plate distributes clamping force across the insulation surface and accommodates mineral wool thicknesses up to 5 inches.

The Grip-Lok MW Plate secures up to 5ʺ mineral wool. It can be installed into any substrate, including wood, metal, or masonry. Made from mill galvanized steel to prevent corrosion. Unlike adhesive stick pins, the Grip-Lok MW plate provides permanent attachment of mineral wool to the substrate. Curled sides provide rigidity and prevent sharp edges.

Not intended for structural attachment or primary cladding support. Fastener type and embedment must be verified based on substrate and project wind load requirements. Confirm compatibility with specified air/water-resistive barrier and wall assembly components.

This warranty is provided in lieu of all other expressed or implied warranties, including warranties of merchantability or fitness for a particular purpose. TRUFAST is not responsible for consequential or incidental damages.

Thermally efficient structural cladding support system designed for exterior rainscreen assemblies installed over continuous insulation and air/water-resistive barriers. ProChannel Ci integrates Grip-Deck TubeSeal® technology to minimize penetrations and reduce air and water intrusion at fastening points while maintaining structural attachment of cladding supports. The hat channel support members can be installed horizontally or vertically to accommodate substrate conditions and wall assembly requirements.

ProChannel Ci Cladding Support system with Grip-Deck TubeSeal® technology is a thermally efficient structural exterior rainscreen wall cladding attachment system that is intended to minimize penetrations through the insulation and AWRB layers.

Not intended to replace primary air-barrier transitions or flashing details. Structural capacity, fastener selection, embedment, and spacing must be verified for substrate type, insulation thickness, cladding weight, and project wind loads. Confirm compatibility with specified insulation and AWRB materials.

This warranty is provided in lieu of all other expressed or implied warranties, including warranties of merchantability or fitness for a particular purpose. TRUFAST is not responsible for consequential or incidental damages.

2" diameter solid cap washer that attaches rigid insulation. Dual prongs enable pre-spotting for fast, on-the-wall fastener assembly. Flexible perimeter flattens without tearing insulation facer.

Thermal-Grip ci Prong Washers are for use with Grip-Deck® screws for continuous rigid insulation (ci) when insulation is being installed as the weather barrier or if insulation is being attached over a primary air barrier system.

This warranty is provided in lieu of all other expressed or implied warranties, including warranties of merchantability or fitness for a particular purpose. TRUFAST is not responsible for consequential or incidental damages.

Thermally efficient masonry veneer anchor engineered to secure brick veneer to structural substrate through continuous insulation. Thermal-Grip® Masonry Veneer Anchor reduces thermal bridging while helping maintain air- and water-barrier integrity at anchor penetrations.

The Thermal-Grip MVA attaches rigid insulation and anchors brick veneer to the supporting structure in masonry cavity wall construction.

Not intended for use outside published substrate, insulation thickness, or load capacity parameters. Anchor spacing, embedment, and design must be verified for project-specific wind loads and masonry veneer requirements. Confirm compatibility with specified air-barrier and insulation systems.

This warranty is provided in lieu of all other expressed or implied warranties, including warranties of merchantability or fitness for a particular purpose. TRUFAST is not responsible for consequential or incidental damages.

Flexible 2 inch diameter insulation washer designed to assist in the mechanical attachment of commercial building wrap and rigid foam insulation. Thermal-Grip® Flat Washer distributes load at the fastener head while helping to seal penetrations through the membrane.

TRUFAST®’s Thermal-Grip® Flat Washer aids in the mechanical attachment of commercial building wrap and rigid foam insulation.

Not intended for structural attachment or cladding support. Fastener type, embedment depth, and spacing must be verified based on substrate and project wind load requirements. Confirm compatibility with specified WRB and insulation materials.

This warranty is provided in lieu of all other expressed or implied warranties, including warranties of merchantability or fitness for a particular purpose. TRUFAST is not responsible for consequential or incidental damages.

Integrated plate fastener with sealing technology engineered for attachment of lath over continuous insulation while reducing air and water infiltration at blind fastener penetrations. Grip-Plate TubeSeal™ compresses and seals at the facer of the WRB or air-barrier located between the substrate and insulation layer.

The Grip-Plate TubeSeal™ fastener from TRUFAST® is designed to help seal blind fastener penetrations of your WRB and air-barrier when mechanically attaching lath over continuous insulation.

Not intended to replace primary air-barrier transitions, flashing, or detailing. Fastener selection, embedment, and spacing must be verified for substrate type, insulation thickness, and design wind loads. Confirm compatibility with specified WRB and air-barrier materials.

This warranty is provided in lieu of all other expressed or implied warranties, including warranties of merchantability or fitness for a particular purpose. TRUFAST is not responsible for consequential or incidental damages.

Insulation fastener with integrated sealing technology designed to reduce air and water infiltration at blind fastener penetrations through water-resistive and air barrier membranes. Mineral wool and rigid foam insulation must be mechanically attached, and often over a WRB or air-barrier. Thermal-Grip TubeSeal® provides mechanical attachment of continuous insulation while compressing and sealing at the WRB or air-barrier facer between the substrate and insulation layer.

The Thermal-Grip TubeSeal® fastener from TRUFAST® is designed to help seal blind fastener penetrations of your WRB and air-barrier when mechanically attaching continuous insulation.

This warranty is provided in lieu of all other expressed or implied warranties, including warranties of merchantability or fitness for a particular purpose. TRUFAST is not responsible for consequential or incidental damages.

Galvanized 1-1/4 inch steel plate washers engineered to provide secure mechanical attachment of lath, exterior gypsum sheathing, plaster bases, and stucco assemblies. Grip-Plate® Washers distribute load over a broader surface area to improve holding power and reduce fastener pull-through in cementitious and cladding support applications.

Grip-Plate Washers attach lath, exterior gypsum sheathing, and can also be used for plaster and stucco repair.

Not intended for structural load-bearing applications or primary framing connections. Verify compatibility with substrate type and specified fastener. Not recommended for use in highly corrosive environments without appropriate corrosion protection.

This warranty is provided in lieu of all other expressed or implied warranties, including warranties of merchantability or fitness for a particular purpose. TRUFAST is not responsible for consequential or incidental damages.

Single-screw veneer tie for anchoring masonry veneer to concrete backup walls, providing a 100 lb working load in both tension and compression at 0.05 inch deflection. Suitable for use in veneer wall assemblies detailed in accordance with applicable IBC and TMS 402/602 requirements.

Single-screw veneer tie for anchoring masonry veneer to cold-formed steel stud backup walls. Designed to resist 100 lb working load in both tension and compression at 0.05 inch deflection, suitable for use in veneer wall assemblies detailed in accordance with applicable IBC and TMS 402/602 requirements.

1-3/8” thick steel gauge door with a 0.20 U-Factor (R-Value 13.0).

Commercial applications that require a door with residential design and color options.

Available in sizes up to 20' wide x 16' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

2″ thick, thermally efficient residential steel garage door, featuring NeuFoam™ polyurethane insulation that fills 100% of the section’s interior.

For commercial applications that require residential design options and colors.

Available in sizes up to 24' wide x 16' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

2" thick, heavy-duty aluminum sectional rail and stile door. Increase thermal performance with ThermaXPS™.

Aluminum full view door for maximum visibility and design options.

Available in sizes up to 24' wide x 24' high.

Standard hardware warranty is one year. Section warranty against defects in material and workmanship is five (5) years. Window components warranty is (3) years.

3" thick, heavy-duty aluminum sectional rail and stile door with full-view glazing for large commercial openings.

Aluminum full view door with focus on increased durability and higher wind load ratings.

Available in sizes up to 24' wide x 24' high.

Standard hardware warranty is one year. Section warranty against defects in material and workmanship is five (5) years. Window components warranty is (3) years.

1-3/4" thick, aluminum sectional door, streamlined rail construction, with full-view glazing designed to maximize daylight and visibility.

Aluminum full view door for maximum visibility and design options.

Available in sizes up to 16' wide x 14' high.

Standard hardware warranty is one year. Section warranty against defects in material and workmanship is five (5) years. Window components warranty is (3) years.

Steel door constructed with 2" thick sections and nominal 24-gauge steel for standard-duty applications. Optional insulation is available to enhance thermal and acoustic performance while maintaining simplified configuration options.

Applications where a standard non-insulated door is needed.

Available in sizes up to 20' wide x 16' high.

Standard hardware warranty is one year. Section warranty against rust-through is ten years.

Heavy-duty commercial steel door constructed with 2" thick sections and 20-gauge steel for maximum durability in demanding environments. Optional insulation enhances thermal and acoustic performance, while ColorWave™ finishes provide coordinated color options.

Applications where a heavy-duty non-insulated door is required.

Available in sizes up to 32' wide x 24' high.

Standard hardware warranty is one year. Section warranty against rust-through is ten years.

Steel door constructed with 2" thick sections and 24-gauge steel to provide reliable performance across a broad range of applications. Optional insulation improves thermal and acoustic performance, and a wide selection of standard colors and ColorWave™ finishes supports design flexibility.

Applications where a standard 24ga non-insulated door is needed.

Available in sizes up to 32' wide x 24' high.

Standard hardware warranty is one year. Section warranty against rust-through is ten years.

Steel two-sided door, features a core of polystyrene insulation laminated between a 26-gauge interior steel and a 24-gauge exterior steel skin. The EC224 is available in white and is perfect for applications where thicker steel is specified.

Applications requiring a standard insulated door.

Available in sizes up to 24' wide and 16' high

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

Steel two-sided door, features a core of polystyrene insulation laminated between two high-strength 26-gauge steel skins. EC200 is available in six colors, two panel styles and optional windows to meet the need of any application.

Applications requiring a standard insulated door.

Available in sizes up to 24' wide x 16' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

Insulated sectional steel door with advanced thermal and structural performance for demanding environments. 3″ thick door with U-Factor of 0.19 (R-Value 24.54).

Ideal for applications requiring maximum thermal efficiency and long-term durability.

Available in sizes up to 40' wide x 24' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

Premium insulated sectional steel door with advanced thermal and structural performance for demanding environments. 3″ thick door with U-Factor of 0.19 (R-Value 24.54), 20-gauge exterior.

Applications requiring the highest thermal efficiency and durability.

Available in sizes up to 40' wide x 24' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

Heavy-duty, sectional, 20-gauge steel exterior door, 2″ thick with a U-Factor of 0.21 (R-Value 18.3).

Ideal for heavy duty applications.

Available in sizes up to 36' wide x 24' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

High-performance insulated sectional door with U-Factor of 0.17 (R-Value 18.3), 2″ thickness, is engineered for enhanced energy efficiency in commercial applications. Additional colors available.

Applications where an insulated door with a large selection of standard colors is needed.

Available in sizes up to 36' wide x 24' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

High-performance insulated sectional door with U-Factor of 0.21 (R-Value 18.3), 2″ thickness, is engineered for enhanced energy efficiency in commercial applications.

Applications with focus on high thermal efficiency and performance.

Available in sizes up to 36' wide x 24' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

Insulated sectional steel door with 1-3/4" thick polyurethane core and 25-gauge exterior steel for durability and improved thermal performance.

Ideal for any applications that require an insulated door.

Available in sizes up to 36' wide x 24' high.

Standard hardware warranty is one year. Section warranty against delamination and rust-through is ten years.

Fire-rated rolling steel door with automatic closing for code-compliant fire separation. Provided with fusible links that automatically release to close the door at 165°F, the door’s descent can also be triggered by smoke and heat detectors, a building’s alarm system, or SS90 fail-safe devices. FireCoil fire-rated rolling doors are UL, C-UL, FM, and CSFM-labeled.

Large openings that require a fire rated door.

Available in sizes up to 30' wide.

Standard warranty is one year.

Fire-rated rolling counter shutter providing code-compliant fire protection at service openings. Provided with fusible links that automatically release to close the door at 165°F, the shutter can also be triggered by smoke and heat detectors, a building’s alarm system, or LM21 fail-safe release devices. All FireCurtain counter shutters comply with UL, C-UL, FM, and CSFM requirements for 3-hour, 1-1/2-hour, or ¾-hour fire ratings.

Any counter windows that require a fire rated counter shutter.

Available in sizes up to 12' wide and 8' high.

Standard warranty is one year.

Rolling security grille, straight or brick pattern, provides visibility, airflow, and controlled access for commercial applications. Exterior and interior applications.

Openings where security but also visibility and air circulations are important.

Available in sizes up to 35' wide and 24' high.

Standard warranty is one year.

Compact rolling counter shutter designed to secure concession and service openings.

Counter window openings.

Available in sizes up to 20' wide x 10' high.

Standard warrant is one year.

High-performance rolling steel door engineered for high-cycle durability and security.

Optimized for high-traffic environments where standard rolling steel doors lack the necessary speed and cycle life.

Available in sizes up to 20' wide x 14' high.

Standard warranty is two years or 300,000 cycles (whichever comes first).

Rolling service door. Aluminum, steel, or stainless steel slats available in multiple gauges for durable performance in commercial and industrial environments. Available with flat, insulated flat, small contour, large contour, or perforated slat profiles to accommodate functional and aesthetic requirements.

DuraCoil rolling services doors can be used in both exterior and interior applications including corrosive environments. They are also suitable for high usage applications where durability is important.

DuraCoil rolling service doors can be manufactured in sizes up to 40' wide.

Standard warranty is one year.

Custom aluminum standing-seam or interlocking panel awnings with welded frames provide durable, low-maintenance sun and rain protection at building transitions.

Specified for commercial and institutional entrances, walkways, and transitions where rigid canopy systems are required to resist wind, snow, and long-term exposure.

Not intended for applications exceeding engineered load capacities or where architectural integration requires non-standard attachment conditions without structural coordination.

Standard manufacturer warranties apply; extended warranties may be available depending on coating and finish selection.

Post-supported extruded aluminum canopy systems engineered for wind and snow loads provide economical weather protection along pedestrian walkways and entrances.

Primary entries, transit shelters, covered walkways.

Requires ground support posts.

Tensioned exterior shading and weather protection using high-performance architectural fabrics. Systems are configured for attachment to building structures and coordinated with façade assemblies and adjacent construction.

Used at building entrances, storefronts, windows, walkways, and outdoor gathering areas for sun control, rain protection, and visual identity in commercial and institutional projects.

Not intended for locations requiring impact resistance, fire resistance, or continuous snow load capacity beyond fabric system design limits.

Fabric warranties vary by selected fabric manufacturer; extended warranties greater than one year may be available depending on fabric type.

Extruded aluminum sunshade systems with horizontal or vertical louvers designed to reduce solar heat gain and glare while enhancing facade appearance.

Window walls, façades, curtain walls.

Not intended as primary weather barrier.

Warranty terms are project-specific; extended warranties may be available depending on materials and finishes.

Wall-mounted aluminum canopy providing unobstructed overhead cover. Internally supported extruded aluminum canopy with steel support arms and integrated drainage provides streamlined weather protection without ground supports.

Main entries, storefront canopies.

Requires structurally capable wall substrate.

Overhead supported extruded aluminum canopy with built-in drainage and customizable fascia and decking provides durable weather protection at building entrances and service areas.

Building entrances, walkways, exterior transitions.

Not suitable where structural support is inadequate.

Steel palisade security fencing system with anti-climb picket profiles and mechanically fastened components designed for high-security perimeter applications. Vertical pickets attach to pre-punched horizontal rails using break-away nuts and anti-pry bolts, with replaceable individual pickets, anti-climb projections, and I-beam support posts for permanent installation.

Commercial and Industrial

See Warranty Information

StuccoDri is a water repellent, high performance, permeability reducing liquid admixture (PRA) designed for cementitious stucco. It is a liquid admixture that replaces water in the mixing process at a 1:1 ratio. Integral, permanent water resistance—built into the mix. Up to 120% permeability reduction on full-thickness stucco. Compatible with lath-applied and direct-applied stucco systems. Accepts traditional, properly applied exterior paints and coatings designed for stucco.

Exterior above-grade wall surfaces in commercial and residential construction, including stucco assemblies. Suitable for use in both new construction and remodeling projects.

Not intended to function as a waterproofing membrane or as a surface-applied treatment. Do not apply in standing water or to saturated substrates; use only where substrates are properly prepared and suitable for the intended installation conditions.